Asbestos Awareness

Course Length: 4 hours

Fee: $100.00 per person

The Asbestos Awareness program will guide you through all aspects of Asbestos from the hazards that are associated with Asbestos to how to protect yourself with safe work practices

Our comprehensive course will explain in detail what you need to know, emphasize key points and test your knowledge retention after each module.  The course has been designed to meet and exceed Occupational Health and Safety Guidelines.  By completing this course you can improve your knowledge of an important part of workplace safety.  After completion of this course, you will be issued a certificate of completion.

Asbestos Awareness Modules:

  • Asbestos uses
  • Types of Asbestos
  • Dangers of Asbestos
  • Exposure hazards
  • Worker Contamination
  • Work Environment Inspection
  • Asbestos Personal Protective Equipment
  • Air-suppling respirators
  • Air-purifying Respirators
  • Operation and Fit of Respirators
  • Emergency Plans
  • Medical Emergency Procedures

After completion of this course you will understand:

  • What Asbestos is comprised of
  • Health risks of Asbestos
  • Regulations and exposure limits related to Asbestos
  • Asbestos safe work practices

Course material

Participant manual, record of attendance, test, and wallet card
contact us.

Confined Space Awareness

Course Length: 8 hrs

Fee: $165.00 per person

Workers are killed or injured every year while working in or around confined spaces.  It is estimated that 60% of all fatalities are would be rescuers.

This program will provide supervisors, entrants and attending workers with the information needed to understand the potential hazards of working in these spaces and the requirement necessary to control hazards prior to entry.

Participants will engage in exercises where all confined space documentation will be used.

The course is broken down into the following content modules:

  • Legislative requirements
  • Definitions
  • Elements of a confined space program
  • Hazard Assessment
  • Entry Plan
  • Entry Permit
  • Confined Space Controls
  • Responsibilities
  • On-Site Rescue
  • Questions and Answers

Course Material

Participant manual, sample entry and hot work permit, hazard assessment and entry plan, test, record of attendance and wallet card
contact us.


Working at Heights

Course Length: 8 hours

Fee: $135.00 per person

In association with Start Safe an approved Working at Heights training provider by the Chief Prevention Office, All Safety is offering this mandated course.

This program will provide participants with an understanding of duties and responsibilities when working at elevated heights, potential fall hazards, and controls, and appropriate selection, use, and limitations of various types and applications of fall protection and arresting equipment.  This program reviews the basics of fall protection and then leading you through the correct application of different systems.  A practical demonstration of harness inspection and donning is given as all participants are required to inspect and don a harness during the course.

Course Content:

Module 1 – Basic Theory

  • 3.5 hrs long
  • Fundamental elements on how to work safely at heights using construction related content

Topics

  • Legislative Responsibilities for working at heights
  • Hazard Recognition, Assessment, and Hierarchy of Controls
  • Various Fall Protection and Prevention applications and limitations of PPE
  • Warning methods and physical barriers
  • Ladders safety
  • Introduction to PPE

Module 2 – Practical

  • 4 hours long
  • Nice advanced and in-depth information on fall protection systems including hands-on demonstrations of equipment and procedures
  • Practical demonstration of the proper use, inspection and donning of harnesses

Topics

  • Barriers and other fixed equipment
  • Fall protection equipment (travel restraint, fall restricting, fall arrest)
  • Anchor points
  • Work access platforms
  • Rescue planning

Course Material:

Participant manual, test, record of attendance and temporary wallet card. (permanent card will be issued by the CPO’s office)
contact us.

WHMIS 2015 GLOBALLY HARMONIZED SYSTEM (GHS)

Course Length: 4 hours

Fee: $65.00 per person

In February 2015, Health Canada released WHMIS 2015 based on the Globally Harmonized System (GHS) of classification and labeling of controlled products. Canadian employers, suppliers, and manufacturers of controlled products will be required to transition to these new WHMIS rules.

With the implementation of the GHS, the WHMIS system has undergone significant change to hazard criteria, classification process, label elements and the Material Safety Data Sheets (MSDS) known under the GHS as Safety Data Sheets (SDS).

This course has been designed to provide participants with a solid comprehension of the GHS and the impact it has on the WHMIS system.  It will allow individuals to implement the new rules which will improve hazard communication linked to controlled products.

The course is broken down into the following content modules:

  • Overview of the Globally Harmonized System
  • Classification of Controlled Products
  • Hazard Communication
  • Labelling
  • Safety Data Sheets

Course Material

Participant manual, final review, record of attendance and a wallet record of training card
contact us.

WHMIS

Course Length: 4 hours

Fee: $65.00 per person

Our WHMIS course can be geared toward your company and industry sector.

This course provides education regarding Legislative requirements, controlled products, classification, supplier and workplace labels, and material data safety sheets. Successful participants receive a WHMIS certificate.

Course content:

  • Classification of controlled products
  • Labeling
  • Material Safety Data Sheets (MSDS)
  • Legal requirements

An annual review course is available with proof of adequate training. Full Course should be taken every three years with a work specific refresher taken annually.

Course Material

Participant manual, record of attendance, test, and wallet card
contact us.